SEEDING TECHNOLOGY

Seeding Technology

saatbett.jpg

The soils we work required special care.

The trend in Europe leads to the fact that the soil is covered with plants the full year – also on farms which do not grow winter crops. Further on, through the intensive grassland usage the natural regeneration of the grassland does not happen and has to be done through machinery.

For every operation (under-, after sowing, sowing of inter-crops, new sowing and distribution of slug-pellets) on every farms size we offer the ideal solution. With pleasure we advise you to chose the correct seeder for your cultivator, weeder, …

Mechanical Intercrop Seeder DRILLBOX / MECHANICBOX

DRILLBOX / MECHANICBOX2.60-3.00 m / 3.00 m

In recent years Europe crop farming has increasingly and extensively relied on stubble inversion machinery such as cultivators, rotary harrows etc.
Continuing such rationalization measures while at the same time preventing the soil from silting up, eroding and compacting as well as keeping the cost for fallow area farming as low as possible, will make the use of inter-crop seeders indispensable for working the soil in a minimal way

.DRILLBOX / MECHANICBOXDRILLBOX / MECHANICBOXEinböck DRILLBOX / MECHANICBOXEinböck DRILLBOX / MECHANICBOXEinböck DRILLBOX / MECHANICBOXEinböck DRILLBOX / MECHANICBOXEinböck DRILLBOX / MECHANICBOXeinboeck drillbox PB7147Einböck DRILLBOX / MECHANICBOX

DRILLBOX

The DRILLBOX or MECHANICBOX you can seed 5 kg/ha of any inter-crop and / or seed mix in a simple oversowing procedure. By using a knob for ifine and a lever for coarse settings you can adjust the seeding rate. The SEEDBOX features an activation wheel system with baffle plates and can also be equipped with a stirring shaft for an extra charge.
The specially shaped distribution deflector plates spread the seeds evenly. The system is activated by a separate large bottom drive wheel with metal drive cassette. High gusset plates inside the tank keep the seeds from slipping and ensure exact seed distribution even on sloped terrain.The MECHANICBOX should come into operation by slowly working machines (subsoiler, rotary harrow,…) with a shallow mounting position respectively falling height. You should chose the DROLLBOX on the other hand on machines with high working speed (cultivator, disc harrow, …) and from approx. 70 cm mounting height.

Mechanical seeding box for attachment on different machines from 2.60 m – 3.00 m working width

  • Primarily for initial sowing
  • Intercrop seeding
  • All seed types as well as granulated dung
  • Calibration plate
  • Exact metering through the shearing wheel system
  • Special shaped distribution deflector plates
  • Adjustable mounting consoles
  • Bottom drive wheel with two long actuation metal drive cassettes

Pneumatic Airseeder P-BOX-MD (mechanic drive)

einboeck-p-box3.00 m – 12.00 m

For sowing-in, sowing-after or sowing-under the P-BOX-MD is an optimal machine. With its compact construction, the P-BOX-MD can be built onto on almost all machines (Disc Harrows, Cultivator, Cross-kill roller, etc.). With the P-BOX-MD you can distribute all seeds and mixtures up to a size of 5 mm depending on the quantity and working speed via simple adjustment between 1 kg and 300 kg / ha.

 

einboeck-pneumaticbox-Ieinboeck-pneumaticbox-02einboeck pbox PO4337einboeck pbox PB12725einboeck-pneumaticbox-05einboeck pbox PB11605einboeck-pneumaticbox-07einboeck-pneumaticbox-VIIIeinboeck-pneumaticbox-09

P-BOX-MD

The 300 l seed tank can upon request also have a volume of 500 liters. A stirring shaft prevents the de-mixing as well as the bridge building in the tank.
The flexible drive shaft, connected to a rubber or tail wheel drives the step-less gearbox, which runs the seeding roller and the stirring shaft via a chain.

Consequently the seeding shaft brings the seeds in the air canal, where it is, depending on the size of the machine with help of the air amount of an electrical, cardan shaft driven or hydraulically driven fan through plastic hoses, brought to the distribution plates. The especially formed deflector plates guarantee also with wind an exact distribution of the seeds.

The P-BOX-MD is ideal for the following usage possibilities:

Inter-crop seeding:

to prevent azote from being washed out the inter-crop seeding in tillage is getting more and more important and is obligatory in water-protection areas. The seeding of inter-crops should be done immediately after working the soil in order to utilise the humidity in the soil.

Undersowing of grass or clover in existing grassland:

due to weather conditions or mistakes in cultivation the balance in the grassland can be disturbed. The non-turning improvement of grassland provides excellent ways to improve the situation.

Sowing of clover or clover/grass into grain:

After one or two combing passes, the oversowing of clover is possible in the 3 to 4 leaf stage. During the autumn and winter, before ploughing for the summer grain, a successful establishment of clover in grain can contribute as much as 100 kg of nitrogen. Green fields following grain harvests are considered very beneficial ecologically due to the good nitrogen balance they provide.

Sowing grass in maize:

After a round of hoeing with the plants at a height of 20 – 30 cm, oversowing the grass can begin. From an efficient oversowing in maize you can expect a number of advantages:

  • - Better carrying capacity of the soil during the harvest and during fertilising- Suppression of any germinating weeds- Bonding of nitrogen in autumn – after the maize harvest it provides a sensible way of utilizing manure- Improvement of the soil fertility- Lower amount of herbicides necessary

Technical Characteristics of:

Seeding box for mounting on different machines up to max. 6.00 m working width

  • - 8 outlets with 8 distribution plates (own dosing unit for every outlet)- Double electric fan up to 6.00 m working width (or with heavy seeds on 3.00 m working width)- Step-less gear with overload protection- Seeding box with 300l tank volume (larger tank on request)- Distribution of seeds with baffle plates- Drive wheel with flexible shaft- Hectare counter electronic- Electronic control module

Seeding box for mounting on different machines up to max. 9.00 m working width

  • - 6 outlets with 12 distribution plates (own dosing unit for every outlet)- Mechanic fan- Step-less gear with overload protection- Seeding box with 300 l tank volume (larger tank on request)- Distribution of seeds with baffle plates- Drive wheel with flexible shaft- Hectare counter electronic- Electronic control module (upon request)

Seeding box for mounting on different machines up to max. 12.00 m working width

  • - 8 outlets with 16 distribution plates (own dosing unit for every outlet)- Mechanic fan- Step-less gear with overload protection
  • - Seeding box with 300 l tank volume (larger tank on request)- Distribution of seeds with baffle plates- Drive wheel with flexible shaft- Hectare counter electronic- Electronic control module

Pneumatic Airseeder P-BOX-ED (electric drive)

einboeck-box-speed3.00 m – 12.00 m

Based on the P-BOX-MD the P-BOX-ED differs only in the way of driving the seeding roller. On the P-BOX-MD the seeding roller is driven through a stepless oilgearbox by a rubber- or a tail-wheel via the soil, on the P-BOX-ED the seeding roller is driven by an electric motor. The electronically controlled electric motor always turns in the speed adjusted by you. The P-BOX-ED is especially suitable for machines, where it is difficult to mount a bottom drive lite it is required by the P-BOX-MD.

 

einboeck pboxspeed PB11740einboeck pboxspeed PB11689einboeck pboxspeed PB11775einboeck pboxspeed PB12793einboeck pboxspeed PB3740einboeck-speed-tronic-06

P-BOX-ED

The 300 l seed tank can upon special order also have a volume of 500 litres. A stirring shaft prevents the de-mixing as well as the bridge building in the tank.
The seeding roller, driven by an electric motor, brings the seeds in the air canal, where it is, depending on the size of the machine with help of the air amount of an electrical, cardan shaft driven or hydraulically driven fan through plastic hoses, brought to the distribution plates. The especially formed deflector plates guarantee also with wind an exact distribution of the seeds.

The P-BOX-ED is ideal for the following usage possibilities:
Inter-crop seeding
Undersowing of grass or clover in existing grassland
Sowing of clover or clover/grass into grain
Sowing grass in maize

Technical Characteristics of:

Seeding box for mounting on different machines up to max. 6.00 m working width
– 8 outlets with 8 distribution plates (own dosing unit for every outlet)
– Double electric fan up to 6.00 m working width (or with heavy seeds on 3.00 m working width)
– Seeding box with 300 l tank volume (larger tank on request)
– Distribution of seeds with baffle plates
– Electrical drive of seeding roll electronically controlled

Seeding box for mounting on different machines up to max. 12.00 m working width

– 8 outlets with 16 distribution plates (own dosing unit for every outlet)
– Seeding box with 300 l tank volume (larger tank on request)
– Distribution of seeds with baffle plates
– Electrical drive of seeding roll, eletronically controlled

Pneumatic airseeder P-BOX-STI (Speed-Tronic inside)

Machine

 P-BOX-STI (Speed-Tronic inside)

The P-BOX-STI is a pneumatic airseeder with electrical seed amount dosage.The user-friendly SPEED-TRONIC control unit regulates the seeding amount depending on the factual working speed. The necessary speed-data is obtained from various sensors or via the 7-pole signal cable from the tractor. With the P-BOX-STI (and also with the P-BOX-MD and the P-BOX-ED) all usual kinds of seed up to a size of 5 mm / 0.2“ can be seeded, dependung on the amount of seeding and the working speed, with an easy adjustment from about 1 kg to 300 kg / ha – 0.9 lb to 267 lb / ac.

The P-BOX-STI can be retrofitted to any Einböck-machine and also to a machine of another brand with only little effort.

 

PBOXSTI 02PBOXSTI 03PBOXSTI 04

Various functions

• Hectare- and acre-calculation of daily and total areas
• Operating hours counter
• Automatic calibration test – optional with calibration button attached to the machine
• Automatic switching on/off of the seeding roller on the headland via upper link sensor (optional)
• Pre-dose-function
• Hopper level control (optional)
• Air flow control (optional)

Many sensors (e.g. air-flow, linkage, tank level,…) and additional features (calibration test button, GPS-speed sensor,…) allow a precise seeding and monitoring:
PBOXSTI 05

 

Universal seeder ROTOSEEDER

1.00 m – 20.00 m

- For rotation and long-term fallow seed, intercrops, grass seeds, simultaneous cropping, slug pellets & similar granules

- Scatter plate with adjustable casting shovels

- Baffle plate for precise adjustment of the scatter range and the casting requirements

- Special stirring, wave-like motion for grassEinböck ROTOSEEDER

- 12 Volt electric drive, charged by a simple connection to the tractor battery

- Infinitely variable capacity regulation and speed control

- Compact and stable construction, easily attachable to a variety of machines

- 90 liter synthetic container with sealed lid to prevent permeation of dirt and rain water

- Convenient to operate, user friendly control from the driver cabin

- Cables: 3 m cable (conducting electricity) from battery to control module 6 m cable connecting the control module to the Rotoseeder

- Control module with adjustable rotational speed regulation, digital indicator and airtight keyboard.

- Steel frame for mounting in the driver cabin

- Three-point-attachment-set

- Electric control module  “World”

- Adjustable rotational speed regulation

- Digital indicator

- On and Off of seed dispenser slide is also indicated on the control module

Einböck ROTOSEEDEREinböck ROTOSEEDEREinböck ROTOSEEDER

ROTOSEEDER

- Scatter disc with adjustable casting shovels
– robust screwed cover
– special stirring shaft with adapter sleeves to extend the agitator for grasses
– Baffle plate for precise adjustment of the working width range and the spreading characteristics
– Height-adjustable frame with top link mounting
– easy mounting with clamping plate
– 3 m power supply cable from battery to control unit
– 6 m cable from control unit to seeder
– support bracket for mounting the control unit

Electric control module WORLD

- Adjustable rotational speed regulation
– Digital indicator
– Digital inspection of the rotational speed and measurement
– keep the rotational speed constant
– Auto starter for compacted and jammed seeds
– Calculation of the acreage
– Measurement of the operating voltage
– Inspection of the temperature
– Work hours-counter
– Possibility to choose different languages
– Preparation for hydraulic sensor
– Step-less distribution width adjustment 4 – 20 m

Row crop drill CHOPSTAR-SEEDER

CS Seeder01CHOPSTAR-SEEDER

The row crop drill CHOPSTAR-SEEDER was especially developed for seeding legumes in rows (for example soya, peas, lupine, lentils,…), but also for other row crops in drill seeding.

The CHOPSTAR-SEEDER ist flexible to use, because without any problems you can mount the hoe elements from the CHOPSTAR row crop cultivator program to the profile tube frame. So you get a wholesome row crop cultivator. Combined with the front tank you can use it additionally as fertilizer distributor.

CS Seeder02CS Seeder03CS Seeder04

Front tank JUMBO

The front tank JUMBO with a volume of 1500 liters is responsible for the seeding-transport and the dosage. Because of the front mounted tank, there is an optimal weight balance between rear and front..

Comments are closed

Powered by Tempera & WordPress.