SEED BED PREPARATION / FRONT MACHINES

Seed Bed Preparation / Front Machines

sonnenblumen.jpg

The key to a satisfying yield is a proper seedbed preparation.Difficult situation in respect of costs and time of the farmers demand machinery with high productivity and a wide range of fields of applications combined with an optimum working quality.Next to the PTO-driven machines for seedbed preparation the trailed implements gain importance – especially in secondary tillage in grain, rape, potatoes as well as other row crops. Neither climate, fertilizer or chemicals can make up for mistakes in seedbed preparation. By fine-tuning the preparation process the soil can be put in a state of full activation of mineral-based fertilizer.If, however, soil preparation is neglected a harvest loss of 20 percent and higher also due to excessive weed growth may be the result. That is why soil cultivation in spring needs to provide the optimal basis for crop growth and give the roots and the soil life enough nutrients and living space. Consequently, the mechanical equipment is supposed to

  • - level the surface
  • - adjust the depth
  • - loosen and crumble and
  • - re-consolidate and close the soil

We offer a wide range of machines, which excellently take care of these jobs. 

Seed Bed Combination EXTREME

5.00 m – 8.00 m

High power of impact, precise seed bed preparation as well as a big area coverage with low costs of wear parts are the crucial arguments for the use of the seed bed combination EXTREME with hydr. retraction system.

This low-priced, but nevertheless sturdy seed bed combination with EXTREM 2015 01simple hydr. side folding (tines look outward) is made for tractors from 40 up to 115 PS. This machine with a variety of equipment possibilities caters to all agricultural demands of a perfect seed bed preparation. The ideal seed bed is the foundation for a optimal plant development. The cultivated farmland should be well leveled and at the same time loosened over the whole working width and working depth. After that the trailing rolls of the seed bed combination EXTREM make a uniform re consolidation down to the deposit depth of the seeds. An optimal water supply for germ buds through the re-consolidation of the soil is given, so the best conditions for an even germination of the seed beds are given, which means that there is a higher harvest output.

EXTREM 2015 02EXTREM 2015 03EXTREM 2015 04EXTREM 2015 05EXTREM 2015 06EXTREM 2015 07

EXTREME

The set working depth can be exactly held even with shallow seed bed preparation. Thanks to the especially constructed frame and the different tool varieties the machine is very well usable for almost all types of seed bed preparation. Whether maize-, beet root-, crop or rape seed cultivation, etc. the seed bed combination EXTREME creates the basis for the even germination with high field rise.

Universal Roller FRONT-STAR

Einböck FRONT STAR2.50 m + 3.00 m

Many different types of front machines are offered on the market today. Machines with cast rings are mainly for re-consolidation and also for pressing down rocks. Machines with knife-like tools are more for crushing and are used in combination with other machines with combined cultivation method. With these front machines you should especially watch the costs for the wear parts. Also the costs are often not in relation to the advantages.

This special machine with star rolls for extremely heavy soils, with which the clod levelled and crushed in front of the tractor. With this cultivation the seed bed preparation in combination with the rotary harrow or the short combination and seeding machine largely possible in one work step.

Einböck FRONT STAREinböck FRONT STAReinboeck frontstar P9200554

FRONT-STAR

With the 3-row arrangement and the small spacing between the stars the clod is also crushed with humid and extremely heavy soils. With the interlocking of the stars, a clogging can be nearly excluded even with extreme conditions.

The front star crusher is only partly usable with rocky soid conditions. The spring-loaded leveling plate crushes the clod and levels the soil.

Universal front roller FRONT-SPIKE

2.50 m + 3.00 mEinböck FRONT SPIKE

On the market there is a big variety of front mounted implements. Machines with cast iron rings mainly consolidate the soil and eventually press stones into the soil. Machines with knive- or startools breakup the soil and are used in combination with rotary harrows on combined seeding.

Very important is to consider the high costs for wear and tear parts for these front implements. Quite often the purchasing costs don’t have any relation to the achieved advantages.

Einböck FRONT SPIKEEinböck FRONT SPIKEeinboeck frontstar PA9286

FRONT-SPIKE

Combined with a seeding combination the FRONT-SPIKE is the ideal machine for the front linkage. The universal roller FRONT-SPIKE is not only used for re-consolidation of the soil, also the effect in breaking up and leveling the soil is extraordinary. Through the ideal shape and the 3 row adjustment with small distance the special spike discs achieve a very good relation between  finely granulated and rough soil.

As the discs mesh there is also in wet conditions no danger that the roller gets stuck with soil. The spring loaded tine-bar, which is height adjustable without tools, level the plough clod and the clumps are crushed.

Seed Bed Combination STANDARD

Einböck STANDARD3.90 m – 5.80 m

High power of impact, as well as a big area coverage with low costs of wear parts are the crucial arguments for the use of the seed bed combination STANDARD. This low-priced, but nevertheless sturdy seed bed combination with simple hydr. side folding (tines look outward) is made for tractors from 75 up to 115 PS. Tried and tested for years, it offers a variety of combination possibilities in the choice of working tools, such as harrow sections, mini seed bed sections or serrated crumblers. These equipment possibilities all fulfill the agricultural demands for a perfect seed bed preparation.

Einböck STANDARDEinböck STANDARD

STANDARD

The ideal seed bed is the foundation for a optimal plant development. The cultivated farmland should be well leveled and at the same time loosened over the whole working width and working depth.

Afterwards the trailing rolls of the seed bed combination STANDARD take care of an even re-consolidation to the deposit depth of the seeds. An optimal water supply for germ buds through the re-consolidation of the soil is given, so the best conditions for an even germination of the seed beds are given, which means that there is a higher harvest output.

Universal fine Cultivator TAIFUN

einboeck taifun PB138632.50 m – 7.00 m

For effective operation on small or large areas, the Einböck universal fine cultivator TAIFUN is a multi-purpose, all-round machine. The TAIFUN is a classic machine for seed bed preparation due to its high and spacious frame construction – especially for areas with winter greening. The working-in of liquid manure and stable dung as well as light stubble cultivation or second stubble cultivation and the combat of couch grass are no problem for the TAIFUN at all. No other soil cultivation machine except the Einböck short disc harrow TWISTER can be used as universal as the TAIFUN.

einboeck taifun PB9074einboeck taifun PB12683einboeck taifun PB10568einboeck taifun PB10329einboeck taifun PB12673einboeck taifun PB12709einboeck taifun PB7010einboeck taifun PB12702einboeck taifun PB7038

TAIFUN

Equipment characteristics such as a large frame pass line height with optimally tuned line spacing as well as double drag tines between the different trailing rollers and the last tine row guarantee the operation possibilities as mentioned above. The strong large spring tine made from high quality spring steel (50 x 13), distributed on 4 beams, is designed for long product life. The 2-piece frame, hydraulically foldable and lockable, can be retro-fitted with a chassis at any time. Then the machine can work in combination with a drill machine.The rear rollers are height-adjustable by a half hole raster. In order to reach a souverain soil cultivation, single spring mounted double-drag tines are mounted between the last tine row and the rear roller, guaranteeing exact levelling. A front levelling plate (on request) completes the various configuration possibilities of the TAIFUN.

Our mountable inter-crop seeders can be found under “seeding technology”.

Short Disc Harrow TWISTER

einboeck twister PB01502.50 m – 8.00 m

Already the pre-crop harvest paves the way for a successful subsequent tillage. The turning of stubble after harvest should utilize the left-over humidity of the soil and therefore provide the seed advancement of weed seeds and lost crop. No matter if conventional soil cultivation is done with a harrow or non-turning operation.

Einböck TWISTEREinböck TWISTEREinböck TWISTER
Einböck TWISTEReinboeck twister PB7129Einböck TWISTER
einboeck twister PB4101einboeck twister PB4109einboeck twister PB7103

TWISTER

The TWISTER is an extremely compact and versatile universal machine. The TWISTER therefore is suitable for working on small and large farms, independently from field-sizes. With an optimal operation speed of 10-16 km/h the best mix and the desired working pattern can be reached. An impressive daily performance and a reduction of the operation processes will astonish you.
The Einböck TWISTER works most effectively in a working depth of 4-10 cm. After operation the soil surface is smooth and reconsolidated: nevertheless the right choice of the trailing tool is important. Einböck offers various trailing rolls, which cover the total spectrum of perfectly work under the different soil conditions. No matter if cylinder shaped or torpedo roll, 1-row Nova disc, Ringpacker or Trapezium – Farmflex roll, every roll has its strengths in its operation segment.
The rubber suspension of the disc arms absorbs shocks and saveguards the discs and frames from damage. The slightly angled, concave and serrated-edge discs with a diameter of 530 mm cut very aggressively into the soil for a proper mixture of straw, soil and residue. The staggered arrangement of the discs with 2 beams in direction of motion for a 100% worked through surface.
The Einböck TWISTER deserves its name as year-round machine since it offers optimal seed bed preparation, especially for winter-greened areas. The especially developed levelling blade between the discs and the trailing appliance contributes to this.
The setting of the working depth is done with the parallelogram-driven trailing roll in the punched notch, to which the levelling plate is coupled. Additionally the levelling plate for fine settings is height adjustable. For the 3-point-linkage Einböck offers the TWISTER in 2.5, 3, 4, 5 and 6 m working width.

Springtine cultivator VIBROSTAR

Einböck VIBROSTAR1.90 m – 12.00 m

The fine cultivator combination VIBROSTAR is especially used for light, medium as well as rocky soils.
Thanks to the special frame construction with the high quality spring tines an excellent passage with an intensive soil mixture of the seed bed is reached. We recommend this machine for seed bed preparation also after intermediate crops and for the second stubble turning. Depending on the tines the VIBROSTAR ideally can be used also for working-in of liquid and stable manure as well as for combat of couch-grass.

Einböck VIBROSTAReinboeck vibrostar PB13875einboeck vibrostar PB12094Einböck VIBROSTAREinböck VIBROSTAReinboeck vibrostar PO2893Einböck VIBROSTAREinböck VIBROSTAREinböck VIBROSTAR

VIBROSTAR

The vibrating fine cultivator tines cultivate and airate in every desired working depth. They vibrate as well as in direction of motion as side ways – but move only slightly in height, therefore the maintaining of the desired working depth is guaranteed.

Depending on operation the machine is available with 4 or 5 rows with different tine shapes and tine lengths. The frame with 4 rows is also available with front roller. The large offer of different rollers ensures that also the one demanded by your soil is available.

The trailing rollers are parallel height-adjustable by half-hole raster and are also adjustable in the angle of inclination. This way you can adjust the working height of the first roller different from the second one, which leads to a better crumbling and re-consolidation.

Comments are closed